| SL-2000
Series |
|
|
|
PRODUCT
APPLICATION:
The SL-2000 Series Smoke Duct Detector is the latest
innovation for early detection of smoke and products
of combustion present in air moving through
HVAC ducts in Commercial, Industrial, and Residential
applications. The unit is designed to prevent the recirculation
or spread of smoke by air handling systems, fans,
and blowers. Complete systems may be shut down in the event
of smoke detection. The SL-2000 is designed and built to meet all
local code requirements, as well as the NFPA and ICC standards regarding
HVAC supply and return duct smoke detectors. Output terminals are provided for a wide range of remote accessories such as
horns, strobes, remote status indicators, and test/reset key switches or push buttons.
PRODUCT DESCRIPTION:
The SL-2000 includes many features that represent true
innovations from current generation duct smoke
detectors. Our traditional installer/servicer-friendly
approach has been closely followed and expanded
throughout the SL-2000. This philosophy provides a
new level of efficiency in after-purchase value to both
the installer/servicer and end-user. Our attention to
detail has yielded a host of
“No-Tools Required” features, as well as a multiapplication
performance level as yet unmatched in
the industry. The key features below detail many of
the customer-driven innovations incorporated in the SL-2000 Series. Innovative product combined with unsurpassed customer
service equals the right combination for all of your projects.
|
|
FEATURES:
- Low-Flow Technology: Both Ionization and Photoelectric
models listed for velocities between 100-4000 ft./min
- Both models listed for high-temperature applications
- Operating voltages: 230VAC, 115VAC, 24VAC, 24VDC
- Interconnect up to 30 units for common functions
- Patent pending "No-Tools Required" front or rear
loading and removing sampling/exhaust tubes
- Patent pending "Test Port Valve" allows for aerosol
smoke testing without cover removal
- Clear cover fitted with four captive "No-Tools Required"
thumbscrews
- Instantaneous cover removal trouble indication
- Staggered terminal blocks for easier wiring
- Flashing LED on detector head indicates normal operation
- Magnet test capability (magnet included)
- More wiring space than competitive models
- Footprint allows easy retrofit in many applications
without additional drilling
- Over 15 remote accessories available
- Duct wall gaskets on back of enclosure are pre-installed
- Compatible with the WP-2000 weatherproof enclosure
- Reset switch is also an alarm test switch - competitive
models require a magnet or cover removal to test at
unit
- Unit includes green pilot and red alarm visual indicators
- External mounting tabs do not require cover removal
to install
- Colored cover gasket indicates proper cover seal
- UL, CUL, CSFM, and MEA Listed
- Compact, lightweight size means easy handling, lower
shipping costs
- Two sets of 10A form "C" alarm contacts
- One set of 2A form "A" alarm contacts
- One set of 10A form "C" trouble contacts
- Large terminal connection screws
- Standard interchangeable "plug-in" UL268 photoelectric
or ionization heads
- Advanced detector head design yields internal dust
filtering
- No additional screens or filters to clean
- Compatible with building automation and fire alarm
systems
- Ionization and Photoelectric versions available
- Complete wiring details permanently attached to unit
|
|
 |
HOME | PRODUCTS | SUPPORT |
INDUSTRY | CONTACTS
|
|
